MECHANICAL ENGINEERING

mechanical

Department of Mechanical Engineering offers 4 year B.Tech degree course in Mechanical engineering and M.Tech course in Thermal and fluid power Engineering. B.Tech in Mechanical Engineering was one among the 4 courses started when the college was established in 1993. P.G Course started in the year 2012. The Department has recorded a consistent growth over the years. The department is set up with all required infrastructure and human resources. The laboratories are well equipped to help students to carry out project works on the latest developments in the field. The department has independent reference library having more than 500 volumes.

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.  

Prof. Jowhar Mubarak

Asst. Professor,

Mobile:- 9446271225

Email :- This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Qualifications
B.Tech Mechanical Engg
M.Tech Engineering Design
Experience 22 Years

TEACHING STAFF

Sl NoNameDesignationQualification
1 Dr. Mohammed Shekoor T. Professor Ph.D (Heat Transfer)
2 Dr. Aboobacker Kadengal Professor & PG DEAN M.Tech (Turbo machinery), PHD
3 Mr.Aftab A. Karim Associate Professor M.Tech(Industrial refrigeration and Cryogenics Engineering), Persuing PHD
4 Mr. Jowhar Mubarak Assistant Professor & HOD M.E( Engineering Design)
5 Mr. Vinod O. M Assistant Professor M.Tech ( Industrial Engineering),Persuing PHD
7 Mr. Mahesh P. V Assistant Professor M.E (Industrial Engineering)
8 Mr.Anil Kumar B.C. Assistant Professor M.Tech (Thermal Sciences),Persuing PHD
9 Mr. Sreejith M (On QIP) Assistant Professor M.Tech (Thermal Science), Persuing PHD
10 Prajina N. V. Assistant Professor M.Tech (AMSD)
11 Swaraj Kumar B. Assistant Professor M.Tech (Propulsion Engineering), Persuing PHD
12 Mr. Mukul Joseph Assistant Professor M.Tech (Thermal Design)
13 Mr. Ahammed Kabeer Assistant Professor M.Tech (Energy & Engg. Management
14 Mr. Ajith C. Menon Assistant Professor M.Tech (Thermal Sciences)
15 Mr. Robins A G Assistant Professor (Contract) M.Tech (Thermal & Fluid Engineering)
16 Mr. Abin George Assistant Professor (Contract) M.Tech (Thermal Systems)
17 Mr. Arun T.N. Assistant Professor (Contract) M.Tech(Thermal Systems)
18 Mr. Jithesh V. Assistant Professor (Contract) M.Tech( Product Design & manufacturing)

TECHNICAL STAFF

Sl NoNameDesignationQualification
1 Mr. Ramachandran R. Workshop Superintendent ( On Work Arrangement LBS Center)  PHD
2 Mr.Binu K Mani First Grade Instructor B.Tech
3 Mr.Satheesh Kumar C First Grade Instructor M.Tech
4 Mr.Tonymon Antony Workshop Instructor B.Tech
5 Mr. Bibu Y.M. Trade Instructor Gr. I NCVT
6 Mr.Anu P Varghese Trade Instructor, Gr.II Diploma
7 Mr.Jinju V Instrument Mechanic Gr.II Diploma
8 Mr.Prasoon S.K. Trade Instructor, Gr.II B.Tech
9 Mr.Santhosh Damodharan Tradesman  NCVT
10 Mr.Balakrishnan T Tradesman Diploma
11 Jamsheer P.P. Tradesman  
12 Shinu P.M. Tradesman  
13 Jose Edward Tradesman  
14 Anish R Tradesman  

Achievements

Apart from academic activities, the students of ME Dept actively participate in Co/Extra- curricular activities with excellence.

Achievements include

  • University rank holders
  • Paper presentation
  • Conducted/Attended technical festivals
  • Successfully attended various events of University Kalolsvasam

Over the years the department has produced several university ranks in Kannur university B.Tech degree examinations. The names of the rank holders are given below.

Year Rank Student
2000 III Pradeep M Kamath
2001 I Govindan.P
II Saijial
2004 II Anil Kumar. B.C
2005 II Vidhyadha. R.B
2006 II Sandeep Kumar M
III Abdul Mujeeb M J
2007 I Bhushith. K. B
II Melbin Jose
III Nithin K C
2010 III Pavithra Kumara
2011 II Pramod K
III Sreekanth M
2013 II SOURABH K. JOY

Facilities

The department is well facilitated with most useful amenities. It has its own department library, machine shop, smart seminar hall etc

MACHINE SHOP

This lab includes various machines like Lathes, Shapers, Milling Machines and Planing Machines etc.Machine tools are power driven machines used by the mechanical engineers for imparting the desired size and shape to a work piece with the desired accuracy by removing the excess metal in the form of chips. In the machine tool lab, the student performs different operations in the lathe such as taper turning, thread cutting, grooving etc., and also cuts different types of gears in the milling machine provided with indexing mechanism.

FLUID MECHANICS LAB

This laboratory gives the students practical knowledge on the fundamental principles of Fluid Mechanics and can verify the principles of fluid flow. They conduct study of various pipe fittings, valves, gauges, water meter, current meter and on stability of floating bodies, pipe flow and applications of Bernoulli's Theorem etc. The different test rigs available in the lab includes, − Pipe friction apparatus − Orifice Meter apparatus − Rectangular & V-notch apparatus − Ventury meter apparatus − Reynolds apparatus − Rotameter apparatus − Orifice apparatus − Metacentric height apparatus

FLUID MACHINERY LAB

The student acquires practical knowledge by conducting experiments on different hydraulic machinery like pumps and turbines. Some of the facilities provided in the fluid machinery lab are, − Subsonic wind tunnel test rig − Kaplan Turbine test rig − Francis turbine test rig − Pelton turbine test rig − Reciprocating pump test rig − Centrifugal pump test rig − Jet pump test rig − Submersible pump test rig − Gear pump test rig − Axial flow fan test rig

THERMAL ENGINEERING LAB

In our Thermal Engineering Lab almost all types of most modern two stroke and four stroke engines are available for the students to get practical knowledge about the working and characteristics of different engines. The cut sections of engines, gear box etc helps the students to know more about the features of different types of engines. Vane type rotary compressor, 2-stage reciprocating compressor, Vapour compression refrigeration test rig and Air conditioner Test rig are also available in the lab.

INSTRUMENTATION LAB

Our Instrumentation Laboratory is equipped with various transducers and instrumentation trainers, measurement systems, LVDTs, strain gauges, thermocouples, digital thermometers etc. This lab is primarily used for teaching different types of transducers and measurement systems.

STRENGTH OF MATERIALS LAB

Strength of Materials Laboratory offers facilities for testing materials for their strength, behavior and suitability for various applications. The various equipments available in the lab are, − Universal testing machine − Torsion testing machine − Compression testing machine − Impact testing machine − Tensile testing machine − Brinnel hardness Tester − Rockwell hardness tester

HEAT AND MASS TRANSFER LAB

Heat transfer is a subject of widespread interest to the students of engineering curriculum, practicing engineers and technicians in the design, construction, testing and operation of the many diverse forms of heat exchange equipment required in our scientific and industrial fields. To study the heat transfer characteristics state of the art facilities are available in the HMT lab. Some of the test rigs available in our lab include, − Steffan Boltzman apparatus − Heat transfer in forced convection − Heat transfer in natural convection − Heat transfer in extended surfaces − Emissivity measurement apparatus − Thermal conductivity of metal rod − Heat exchanger apparatus − Critical heat flux apparatus

CAD LAB

Computer Aided Design is an essential industrial requirement as a part of technological development. The department has a well-equiped computer laboratory with 30 workstations and advanced softwares such as Matlab, AUTOCAD and ANSYS etc.

CNC MACHINE

As a technology oriented institution, we keep a modern and sophisticated lab for the benefit of students. Presently our CNC lab is equipped with a state of the art technology CNC machine. Precision components of industrial applications can be manufactured in the machine.

MECHANICAL WORKSHOP

The General Mechanical workshop is the common workshop for first and second semester in an Engineering Course. In this workshop students get firsthand experience in modern welding techniques, Foundry, Sheet metal works, forging, fitting, carpentry, and smithy.

Activities

MECHATHLON

The department of mechanical engineering conducts annual intercollegiate techno-management fest “MECHATHLON”, comprising of technical paper presentation, design contests, technical quiz & debate, informals, exhibitions, project stalls etc. MECHATHLON brings the best minds in the country challenging them to explore new possibilities in technology and management. This Technical fest aims to amalgamate the innovative ideas of young Engineers with experienced minds on the various latest technological trends. MECHATHLON gives an opportunity to the young technocrats to work as a team and forge their ideas into masterpieces. This year, MECHATHLON will be conducted on 3,4, &5th of October.

Association

Association of Mechanical engineering Students is introduced to provide a platform for the students to exhibit & sharpen their academic & practical knowledge. Seminars, Working Model Exhibitions, workshops etc. conducted by the association do fulfill the above said purpose thereby achieving an integrated development of the students.

Staff-in-charge: Mr. Sreejith M. Asst. Professor, ME

Group Tutors

Each year admitted students to the department is looked after by a team of faculties who are responsible for and take care of individual students.

Year Group Tutors
2016 Admission Mr. Mukul Joseph & Mr. Ahammed Kabeer
2015 Admission Mr. Swaraj Kumar B. & Mr.Soloman Joseph
2014 Admission Mr. Jowhar Mubarak & Mr. Mahesh P. V
2013 Admission Mrs. Prajina N. V.

Bonus William Hill
Bonus Ladbrokes
Address LBS College of Engineering, 
Povval, Muliyar Post Office,
Kasaragod, Kerala-671542
College Office : 04994 250290, 04994 250555
Principal : 04994 250290
Administrative Officer : 04994 251566

 

Premium Templates